Japanese Quality Darts and Dart Accessories shop.

Diy dart board lights
This is how I made my cheap lights.

Materials used:

Flat aluminium bar 2mm x 25mm x 2000mm 8,95€

Wall/ceiling brackets from Ikea 2€/piece

M4 bolts and nuts

2 meters of light strip from ebay ~5€


First I made a ring out of the flat bar and attached it with a piece of aluminium and some M4 bolts and nuts

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Then I flattened end of the holders and drilled a hole to the holders

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.Guests cannot see images in the messages. Please register at the forum by clicking here to see images.


After that I drilled holes to the ring and attached the holders to the ring with pop rivets


Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Then I installed the led strip and secured the cable with cable ties

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Final testing

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
You could fit a ring or rim with a set of old Xmas lights on clips and pop those Cree LED lamps in them. Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Harrows Saru King  @ 18g

XQMAX VDP @ 21g

Target Board
Reply
Nice DIY Lighting, looks good
Reply
Here is the final product

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
(09-15-2020, 06:38 PM)MrStair Wrote: Here is the final product

Great job !!!
If you know what I'm doing, don't tell me .... I find bliss in my confusion.
Reply
I'm also doing one, this is just the prototype, so far. Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Harrows Saru King  @ 18g

XQMAX VDP @ 21g

Target Board
Reply
(09-16-2020, 01:08 AM)Borisbbadd Wrote:
(09-15-2020, 06:38 PM)MrStair Wrote: Here is the final product

Great job !!!

Thank you!
Reply
MrStair Wrote:Here is the final product

[Image: https://i.imgur.com/HK7BOOd.jpg]
Excellent well done
Reply
(10-16-2020, 08:52 PM)Richa Wrote:
MrStair Wrote:Here is the final product
Excellent well done

Thank you very much. Next I’m going to make a raised oche with check out chart
Reply
(10-24-2020, 02:40 PM)MrStair Wrote:
(10-16-2020, 08:52 PM)Richa Wrote:
MrStair Wrote:Here is the final product
Excellent well done

Thank you very much. Next I’m going to make a raised oche with check out chart

Very nice
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  New dart board set-up PecosJoe 5 564 07-13-2019, 05:18 PM
Last Post: nixer55



Users browsing this thread: 1 Guest(s)
Darts Clearance.