Plumb Bob from a dart
The occasion may arise where one needs a plumb bob to plumb from the bull to the floor, and no problem if one has a plumb bob but what if you don't?

Take a length of string and insert one end into the flight end of a used stem, tape the stem shut making sure the string is centered and then use a drop of super glue to  absolutely secure the string to the stem (again make sure the string is centered in the stem).  After the glue dries just screw the stem into a dart and now you have a plumb bob.
Reply
I just use a alloy micro stem in an old dart. Tie string through hole in stem and let hang....
Reply
Finally a function for allow stems that makes sense
Reply
If you buy a Winmau Sight Right it comes with a threaded insert with fishing line attached to turn your dart into a plumb bob to install your sight right.
[Image: uBd7OCT.png]
Reply




Users browsing this thread: 1 Guest(s)